It takes a lot of work and time to complete a renovation project. Once it’s complete, it is not over yet. The final walkthrough is to ensure that everything is clean, organized, and safe. This is where post-construction cleaning is very crucial.
Table of Contents
Whether you are hiring a professional cleaning services or cleaning it on your own, it is essential that you understand the process. In this article, we will walk you through the importance of cleaning after construction, post-construction cleaning rates, and tips.
Understanding post-construction cleaning
Post-construction cleaning tips you could find are similar to regular cleaning tips, yet the work is more intensive. Construction cleaning may require specialized tools and cleaning equipment.
If you plan to clean it yourself, you may rest most of the equipment from your local hardware store. However, doing it yourself can be costly in the long run. Hiring construction cleaning services can save you time and money.
Benefits of hiring professional post-construction cleaning services
Anyone can clean but in terms of efficiency and effectiveness, only the pros can do it. There are many reasons why it’s worth calling in the pros. Here are some of them:
Professional cleaners are trained to clean every surface and any type of stain. They are also trained to use the best cleaning methods and equipment. Pro cleaners also are keen in terms of places that are usually overlooked such as under new ceilings, or beautiful-looking wallpapers.
Since construction cleaning professionals are fully equipped and trained, they understand the hazards that come with them. They have access to the proper cleaning clothes such as PPE, to avoid unforeseen injuries or events.
Using the right equipment and tools is an essential part of cleaning. If you have your own vacuum cleaner or rent professional equipment, this can either break your own vacuum cleaner or break the bank. This is true if you’re cleaning several areas or rooms in your property.
Professional construction cleaning services will bring the right tools and use the appropriate cleaning solutions. They guarantee to deliver faster and more effective outcomes.
Post-construction work plan
If you decide to clean your property yourself, it is best to set a plan before preparing all your materials. A step-by-step plan will guide you with the sequence of which room to clean and repair first. This will also help you clean each room better and faster.
These are the recommended stages that every construction cleanup service follows:
- Preparation and planning of cleaning works.
- Collection and removal of debris.
- Cleaning of dust from all surfaces.
- Cleaning and washing of surfaces.
- Polishing mirrors and glass surfaces.
- Dusting and arranging furniture, carpets, and curtains.
You’re not required to follow this sequence, however, this helps cleaning faster and less complicated.
Post-construction cleaning checklist
Here’s the list of cleaning supplies you’ll likely need for your post-construction cleaning:
- Durable garbage bags
- A powerful vacuum cleaner with a water filter.
- Mops or brushes
- Microfiber wipes and sponges
- Soft-bristled broom
- Handheld brush and dustpans
- Putty knife
- Hydrogen peroxide
- White vinegar
- Magic erasers
- Plastic sheeting
- Chemicals and special tools for removing stains from building materials.
Post-construction cleaning PPE
Safety should always be considered first when cleaning. By using personal protective PPE (personal protective equipment), you’ll be protected from any sharp surfaces, objects, nails, and broken glass. Here’s the list of protective equipment you should wear:
- Rubber-soled shoes: make sure it has a closed toe.
- Rubber gloves
- Dust masks: protects your lungs
- Eye protection: prevent any irritation from dirt or splinters
Post-construction cleaning tools and equipment
Aside from the cleaning supplies, you also need to prepare the following cleaning tools:
- High-powered vacuum cleaner
- Wet/dry vacuum
- Carpet cleaner
- Floor polisher
- Power washer
Remember to prepare several trash bags for dust and debris. You can hire a dumpster or call your waste management company about fetching a great amount of trash.
Post-construction cleaning steps
After gathering all your equipment and cleaning supplies, it’s time to start working. The initial step is to remove as much fine dust as possible. As a rule of thumb, start cleaning from the front door, and work up to down, and in to out.
Making sure all areas are dust-free. Use a soft-bristled broom to sweep every room, ceiling, and wall. You can also spray lightly on dust with water to create a lump that is easier to sweep. Seal off all unaffected areas, vents, and openings with plastic sheeting.
The next step is a rough clean, then, deep cleaning. Finishing it up with a touch-up clean. When it comes to cleaning up surfaces like marble countertops, it would be best to check for experts that could help you with marble countertop cleaning.
Rough cleaning involves removing any debris and major sources of dirt. This step will remove the majority of the dirt on the property. Here’s how you should do it:
- Remove all remaining construction debris such as scraps of tiles, laminate, plastic, and metal profiles.
- Work on stains and smudges such as paint, glue, foam, and grout.
- Clean windows, glass doors, and partitions.
- Wash down walls, door frames, and baseboards
- Sweep and vacuum floors.
Once you have completed the rough cleaning, go over to your property and conduct a deep cleaning to remove all remaining dirt. Cleaning your property in two passes will warrant you that everything is truly clean. You should start at the farthest point from the exterior and work down and out when you do a deep cleaning.
- Clean and sanitize your bathrooms and kitchen.
- Use a squeegee to clean windows, glass doors, and partitions.
- Dust light fixtures and wipe down bulbs using microfiber cloths.
- Vacuum chairs and sofas, vents, and HVAC filters.
- Wash and clean carpets and floors.
After conducting deep cleaning, it is best to wipe the smudges on your flat surfaces, walls, and windows with a damp microfiber cloth. This is to remove the last signs of construction.
Post-construction cleaning cost
Now that you have full knowledge about post-construction cleaning, it is about time to know the actual cost of post-construction cleaning.
If you opt to hire cleaning services after construction, you should expect a cleaning service price between $0.10 and $0.60 per square foot. However, this amount is affected by so many factors, such as the size of the home or building, type of property, supply costs, location, property’s condition, and level of detail required.
Let’s Wrap Up
Post-construction cleaning is a great help for you, especially when you’re renovating your home. You have a professional to ensure no debris and dust are left on the floor. Our team is trained and bonded to offer you this cleaning service.
You can request a free quote from us today! Call now, or fill out a request form.
We also offer an online booking appointment service here, or just visit our Houzz page